井下安全阀力学性能分析

井下安全阀对安全性和可靠性要求较高。以渤海油田常用油管携带式井下安全阀为分析对象,对其工作压力、地面控制压力、全开启和全关闭压力、最大下入深度和自平衡能力等关键力学性能进行分析。井下安全阀的工作压力值与地面液控压力值相等,其选取依据为井口压力; 全开启和全关闭液控压力值可通过压力曲线法得到; 最大下入深度取决于弹簧安装时的预紧力; 自平衡能力与活塞面积和自平衡孔面积的比值有关,比值越大,自平衡能力越强。     

压裂管汇无损检测方法改进

:按照现有无损探伤检验标准检验合格的压裂管汇在压裂作业时出现了管件刺漏、爆裂等情况。分析了压裂管汇中管件结构的特点和现有的无损检测方法的适用性。增加了管件的检测部位,改进了检测方法,并研制出了能检测不同形状和尺寸管件的超声波探头和比对试件。采用改进的无损检测方法,检测出不合格管件数增加44.9%。新增加检测部位后,检测出不合格管件数增加63.7%。目前已应用改进的无损检测方法1 a多,在压裂作业时未出现高压管件刺漏或爆裂情况。     

New doctors ranking system based on VIKOR method

Nowadays, we can use different websites that help us make decisions about various aspects of our lives. However, privacy protection prevents websites from providing personalised guidelines to users. We propose a novel doctor‐ranking system (DRS) based on multi‐criteria group decision‐making (MCGDM) method to address the problems of privacy protection. The following aspects differentiate our proposed DRS model from previous works: (a) textual information reviews are used to identify user preferences and complementary criteria, (b) criteria weights are determined by term frequency inverse document frequency (TF‐IDF) instead of Delphi method or expert opinion, (c) intuitionistic fuzzy sets (IFSs) are used to replace sentiment analysis to express subjective user criteria, and (d) VIsekriterijumsko KOmpromisno Rangiranjie (VIKOR) method for MCGDM with IFSs is used to solve the doctor‐ranking problem. We apply our proposed model to datasets from Haodf.com to compare the performance of our method with that of sentiment analysis and technique for order performance by similarity to ideal solution (TOPSIS) methods. The experimental results show that our method provides accurate ranking and increases the reliability of DRS.     

Fluid flow and heat transfer with nail dipping method in mould during continuous casting process

ABSTRACT

The character and cause of sliver defect on IF steel sheet surface are studied by means of SEM, unstable flow in mould could induce surface velocity and level fluctuations, leading to surface defects during continuous casting of steel. The nozzle clogging is a serious problem during the continuous casting of steel, due to its influence on the casting operations and products quality. In this study, the nail dipping method for measuring surface velocity and flow direction in molten steel were employed. The fluid flow in mould of whole casting sequence was investigated, especially during the nozzle clogging conditions. The results showed that when nozzle clogging occurred in the 7th heat, the flow velocities on R and L side of nozzle were 0.280 and 0.402?m/s, respectively. The surface defect ratio of hot-rolled and cold-rolled plates increases with the increase of heat flux deviation on both sides of the mould copper. The different clogging per cent on both sides of the nozzle will lead to asymmetry flow, the surface velocity is higher with the small clogging per cent side compared to that of relatively large per cent clogging side.     

Learning bipartite Bayesian networks under monotonicity restrictions

ABSTRACT

Learning parameters of a probabilistic model is a necessary step in machine learning tasks. We present a method to improve learning from small datasets by using monotonicity conditions. Monotonicity simplifies the learning and it is often required by users. We present an algorithm for Bayesian Networks parameter learning. The algorithm and monotonicity conditions are described, and it is shown that with the monotonicity conditions we can better fit underlying data. Our algorithm is tested on artificial and empiric datasets. We use different methods satisfying monotonicity conditions: the proposed gradient descent, isotonic regression EM, and non-linear optimization. We also provide results of unrestricted EM and gradient descent methods. Learned models are compared with respect to their ability to fit data in terms of log-likelihood and their fit of parameters of the generating model. Our proposed method outperforms other methods for small sets, and provides better or comparable results for larger sets.     

The variation of microstructures,spectral characteristics and catalysis effects of Fe~(3+) and Zn~(2+) co-doped CeO_2 solid solutions

Fe~(3+)and Zn~(2+)ions were doped into the lattice of CeO_2 via the hydrothermal method.The micro structure and spectra features were analyzed systemically.XRD results show that the solid solubility of Fe~(3+)and Zn~(2+)ions in Ce_(1-x)(Fe_(0.5)Zn_(0.5))_xO_2 can be identified as x=0.16.The cell volumes are decreased by increasing the doped content.The TEM graphs prove that the grain size of the sample is about 10 nm,and the EDS result indicates that the doped contents are in accordance with that of the theory concentrations.Meanwhile,the doping also causes the increasing concentrations of the defects and oxygen vacancies which are supported by the XPS,Raman,UV and PL characterizations.The samples exhibit better catalytic activities for improving the hydrogen storage properties and the electrochemical kinetics of the ball milled Mg_2Ni based composites.Further,the catalysis effects are improved by increasing the doped contents,which can be ascribed to the increasing contents of the oxygen vacancies,defects,the special electron transition states and the nature of the doped ions in CeO_2-based solid solutions.     

齐大山铁矿南帮含水构造带探测研究

为解决采空区突发涌水给矿山安全生产带来的安全威胁,以齐大山铁矿为研究对象,以高密度电阻率法含水构造带理论模型的正演模拟研究为基础,运用高密度电阻率法对采场南帮含水构造带的异常范围进行了圈定;运用瞬变电磁法进行了二次探测,并对高密度电阻率法所圈定的异常范围进行了验证。研究表明:含水构造带显示为低阻异常特征,在高密度电阻率法探测成果图中显示的两处低阻异常与含水构造带理论模型的正演模拟结果一致;同时,在瞬变电磁法探测成果图中显示的低阻区域均在高密度电阻率法所圈定的低阻异常范围内,二者相互验证,这两处低阻异常均为含水构造带的地球物理异常特征的显示,表明采用高密度电阻率法和瞬变电磁法组合识别技术可实现对隐伏含水构造带的先导性探测。     

基于正交试验的非对称垂直轴水轮机数值模拟

运用正交试验法开展了具有非对称NACA翼型的垂直轴潮流能水轮机的非定常数值模拟研究,分析弯度、弯度位置、前缘半径、最大厚度位置对叶轮能量提取率的影响。使用极差分析法确定了各因素影响的主次顺序和各尖速比下由最优参数确定的翼型。结果表明:在不同尖速比下,弯度是影响水轮机性能的主导因素,对水轮机能量提取率的贡献率分别为44.7%(尖速比λ=2.25)、53.4%(尖速比λ=2.5)和59.4%(尖速比λ=2.75);次要因素为最大厚度所在位置,其余两个参数对其性能影响较小。针对最优参数确定的翼型进行验证,结果证实具有该翼型的水轮机的动力学性能要好于其他翼型。     

γ辐照加工用新型工作模体设计研究

本文研究设计了一种用于获取γ辐照装置辐射场和货物剂量场真实分布的新型工作模体。基于真实γ辐照装置参数构建了有效可用的模拟辐射场，提出了新型工作模体的结构和填料设计方法。采用蒙特卡罗方法和随机填充方法（RCS）模拟计算剂量计套管材料与壁厚、填料小球尺寸、空心填料小球尺寸与壁厚、小球填充方式等影响模体剂量学性能的主要因素的分布规律。在满足计算置信度的前提下，参数优化取值范围为：套管采用壁厚为3~5 mm的铝管，对辐射场干扰不超过4.372 23%；填料选择外径为1~4 cm、壁厚为1.1~11.5 mm、材料等效性好、货物密度模拟范围为0.1~0.5 g/cm³的聚丙烯小球，对辐射场干扰不超过9.998 44%；均匀填充和随机填充模式对辐射场干扰基本持平，且均不超过10%。结果表明，当前设计可行有效，投入低、兼顾参数多且量程更宽，适合推广应用。     

Measurements of thermal-neutron capture cross-section of Cesium-135 by applying mass spectrometry

ABSTRACT

The thermal-neutron capture cross-section (σ₀) and resonance integral (I₀) were measured for the ¹³⁵Cs(n,γ)¹³⁶Cs reaction by an activation method and mass spectrometry. Because of difficulty in the preparation of pure ¹³⁵Cs samples, we used ¹³⁵Cs contained as an impurity in a normally available ¹³⁷Cs standard solution. An isotope ratio of ¹³⁵Cs and ¹³⁷Cs in a standard ¹³⁷Cs solution was measured by mass spectrometry to quantify ¹³⁵Cs. Cesium-135 impurity along with the ¹³⁷Cs standard solution was irradiated at the hydraulic conveyer of the research reactor in the Institute for Integral Radiation and Nuclear Science, Kyoto University. Wires of Co/Al and Au/Al alloys were used as neutron monitors to measure thermal-neutron fluxes and epi-thermal Westcott’s indices at an irradiation position. A gadolinium filter was used to measure the σ₀, and a value of 0.133 eV was taken as the cut-off energy. Gamma-ray spectroscopy was used to measure induced activities of ¹³⁷Cs, ¹³⁶Cs and monitor wires. On the basis of Westcott’s convention, the σ₀ and I₀ values were derived as 8.57 ± 0.25 barn, and 45.3 ± 3.2 barn, respectively. The value of σ₀ obtained in the present study agreed within the limits of uncertainties with the past-reported value of 8.3 ± 0.3 barn.